If printer has stop printing xerox copy and printout is not happening two red light blinking or. power light and red light continuously blinking then this page you can get solution it 100% genuine and all are available in this page step by step.
How To Identify Epson Printer Problem?
Your printer red light blinking When you turn it off and on, the head does not move and the red light Coming or from Pc command print error message show: “Epson service required” or a printers ink pad is end of service life please contact epson support then it will be 100% fix by reset the printer by resetter tools and in this article you have to find the resetter Software.
How To Download Epson L3110/L3150 Resetter
The resetter for Epson models L3110, L3115, L3116, L3150, L3151, and L3152 is a highly effective tool. Please follow the provided instructions carefully to reset your printer, which should resolve any printing issues you may be experiencing. If you encounter difficulties during the reset process, do not hesitate to reach out to us for assistance. Our team is available to help you remotely. We wish you the best of luck and are happy to assist you.
Download Epson L3110/L3115/L3116/L3150/L3100/L3101/L3156 Software Free
How To Solved Epson Printer By Epson L3110/L3150 Resetter
After download the resetter tool from above extract or open it with winrar or zip file and follow the below points:
- Click on adjpro
- click on model
- select your model and port
- go to particular adjustment mode
- select waste ink pad counter then ok
- tick main pad counter and check
- Tick main pad and Initialize
- turn off the printer
- Ready to Print
Hardware Problem identification:
- Epson Printer Scanner Issues – The Epson printer may exhibit a continuously blinking red light and power light, although it can still print when prompted from a computer. This issue may stem from a faulty scanner cable, carbon buildup on the cable, or damage to any internal component, which can trigger the red light.
- Paper Jam – A red light may also indicate a paper jam within the printer. To resolve this, gently remove any jammed paper. Afterward, power off the printer and then turn it back on; this should typically extinguish the red light and resolve the issue. Additionally, overloading the paper tray can hinder the printer’s ability to feed paper properly. If the rollers are excessively worn, this can also lead to paper jams. If the problem persists after restarting the printer, the only solution may be to open the printer for servicing or to replace the rollers.
- Error Code: 000043 – This error may indicate a problem with the sensor wheel or the sensor cable. To address this, clean the sensor wheel and ensure it is properly reattached using adhesive such as Fevi Kwik, Fevi Gum, or double-sided tape. Alternatively, if the sensor cable is damaged, replacing the cable is necessary to resolve the error code 000043.