Epson Eco Tank Printer L3152 Red Light Blinking Problem Reset by Epson L3152 Resetter Adjustment program tool you can download free for fixing your printer problem very easily. You can use it for resetting your waste inkpad counter and using your printer like a new one. If your printer is getting a red light blinking and you want to fix it, then this is the best page to download the resetter tool and reset this printer and problem fix within two minutes without any additional or extra effort, so kindly follow the below process.
First, you have to check the printer status to confirm if it is your printer software problem or hardware problem. After that, download the resetter tools and reset if your printer status is not showing. Then, you have to download the Epson L3152 printer driver. Click here, download the file, and install first. After that, check the Epson status monitor. 3: If you found service required or ink pad end of service life, then you confirmed it is your software problem. Then you need to download the same. When you download the driver, you should confirm your computer’s operating system (Windows 7, 8, 10, or 11) and operating system bits (32 bits or 64 bits).
How to Reset Epson L3152 Red Light Blinking
Here are the steps to fix your printer’s red light blinking problem: By adjustment program or WICReset utility, all are available below: –
How to Check Epson L3152 Printer Status:
Epson EcoTank printer L3152 status Checking: Some steps need to be followed, and all steps are shown below. Please see the proper
- Go to the control panel and select the device and printer.
- You can see your printer, the Epson L3152. Right-click on it.
- Go to the printer printing preference.
- then go to the maintenance
- then click on Epson Status Monitor 3
- Now that you can see the printer status, service is required.
 Adjustment Program Epson L3152 Resetter Download
Now that you have confirmed that your printer needs to be reset or serviced, you have to download the Epson L3152 resetter tool adjustment program, which you have to download. All the tools are available on this site, which you can easily download. First of all, you have to download. After that, reset the printer, and the steps on how to reset all processes are shown below, so kindly follow the steps.
Reset Epson L3152 Step-by-Step
Here is some important steps to follow for fix your printer red light blinking or waste ink pad end of service life problem fix or service required problem fix mentioned bellow:
- Firstly, double-click on your resetter tool and open it.
- go to the adjpro loader
- click on adjpro loader
- select the model and select the port where is connected printer
- After selection, click OK.
- now you click on particular adjustment mode
- Now check the on the main counter.
- click on check
- tick on the main pad and others box tick
- Finally, you should click initialization button
- When you click on initialization, click OK.
- you should turn the printer off and on again and follow next
- check the printer status.
- Now Ready-to-print
- Congratulations!!
How To Download Epson L3152 Resetter
Hello guys, if you needed that resetter for fixing your red light blinking problem, then you have to download the resetter by clicking the below link and learn how to reset the printer for the error service required. Then watch the above video and follow the instructions.
Epson L3152 Resetter Free Download AvailableÂ
Password: ayush
Watch the video instructions for reset epson l3152 printer
For any Epson printer resetter download, follow these steps:
